Products
-
Four-column hydraulic cutting machine
Features:
1. Four-column double-cylinder mechanism design, with good rigidity, can effectively ensure the balance accuracy of the machine, and maintain uniform double-force output at any position of the cutting surface;
2. Intermittent single-stroke operation, two-hand buttons are activated, and an emergency stop device is provided to ensure safe operation;
3. The cutter mold setting is simple, accurate, and the cutting force is high-speed and easy;
-
Flat hydraulic cutting machine
1. The operation is simple and labor-saving, the failure rate is low, the cutting force is strong, and the load breaking speed is fast, more than 1000 times per hour.
2. Knife mold setting device, high and low knife mold adjustment, very simple, accurate and fast.
3. Quiet and low noise during operation improves the working environment.
4. The fine-tuning device can easily obtain the best cutting stroke and prolong the service life of the die and the cutting board.
5. There is a safe operation method.
-
Blister Packing Hydraulic Press
• The automatic feeding cutting machine is equipped with a manipulator, which can reduce labor and increase production efficiency. The four-column double-cylinder structure is adopted.
• Structure, achieve high tonnage cutting and save energy consumption. On the basis of the precision four-pile cutting machine, single-sided or double-sided.
• The surface automatic feeding device improves the efficiency and safety of the machine tool, and increases the production efficiency of the whole machine by two to three.
• Automatic feeding cutting machine is suitable for blister industry, luggage industry, leather processing, shoe industry, packaging industry, toys.
• Cutting operations of large-scale die and higher die for industrial, stationery, automobile industry, etc.
-
Oily glue laminating machine KP-YJ128C
Features:
1. The whole machine is equipped with unwinding, automatic deviation correction, pre-drying, composite drying, water cooling, automatic slitting, surface friction winding and other units. The composite material has the advantages of uniform coating, smooth composite, no stretching deformation, no foaming, no wrinkle, good hand feeling, softness, excellent air permeability, and neat winding.
2. There are many kinds of composite materials, especially suitable for the coating and compounding of fabrics and fabrics, non-woven fabrics and fabrics, non-woven fabrics and leather, sponge and flannel, sponge and leather, etc.
3. Rewinding and unwinding can choose a suitable configuration according to different materials;
-
PUR hot melt adhesive laminating machine
Parameter:
Supporting system: 1 200L glue melting machine
Sol mode: pressure plate type automatic glue melting
Power drive: AC variable frequency stepless speed regulation
Gluing method: scraping
Working width: 1650mm
Mechanical spoke 1800mm
-
PUR hot melt adhesive laminating machine TH-101B
Machine Features:
1. Automatic edge alignment system, automatic alignment, reducing labor.
2. Tension-free unwinding device, no wrinkle, reducing labor intensity.
3. Up to 80 m/min, high-speed production, no drying.
-
PRU Flat Foam Laminating Machine
Reference parameters:
Working material width: 1650mm
Mechanical spoke: 1800mm
Equipment size: 6000 * 4500 * 2200 (L * w * h)
Equipment linear speed: 0-40m / min
-
Magnetic powder brake
Structural Features:
1. CNC precision manufacturing, high precision, fine processing, good linearity, and superior performance.
2. Imported magnetic powder, high purity, no black carbon powder, stable performance and long life.
3. Aluminum alloy structure, with excellent heat dissipation performance, good demagnetization, and fast response speed.
4. Stable operation, no vibration, no impact, no noise under starting, running and braking conditions.
-
Inflatable shaft/inflatable sleeve clamp/safety chuck/
1. The inflation operation time is short. It only takes 3 seconds to separate and place the air expansion shaft and the paper tube to complete the inflation and deflation. It does not need to separate any parts on the shaft end to tightly engage the paper tube.
2. The paper tube is easy to place: the paper tube can be moved and fixed at any position on the axis by the action of inflating and deflating.
3. Large load-bearing weight: The size of the shaft diameter can be determined according to the actual needs of customers, and high-hardness steel is used to increase the load-bearing weight.
-
Glue roller
Aterial: Use high-quality 45# seamless steel pipe and alloy steel pipe
Heating method: heat conduction oil, heat conduction water
Structure: Inner groove with large lead multi-head spiral flow channel or jacket structure
-
Hot melt adhesive film hot pressing laminating machine
Technical parameter:
Floor space: 2200mm long * 2300mm wide * 2000mm high (width can be adjusted according to material)
Machine weight: About 2800kg
Working width: Maximum width 1650mm
Operating speed: 0-20M / min
-
Flame compound machine
Machine power system:
1. Main engine power 3HP, 220 V, variable speed.
2. Receiving 2hp-220v, variable speed regulation.
3. Exhaust fan 1HP.
